CABLE TRAY 45° HORIZONTAL BEND 100X50MM HDGAF
- Vendor:
Tool-Pusher trading and services
1 × AED 18.00
Subtotal:
AED 18.00
Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, dark beige
| Rated cross-section | 2.5 mm² |
| Rated voltage | 800 V |
| Rated DC voltage | 800 V |
| Rated current | 24 A |
| Current at maximum wires | 32 A |
| Standards | IEC 60947-7-1 |
| Volume resistance according to IEC 60947-7-x | 1.33 mΩ |
| Rated impulse withstand voltage | 8 kV |
| Power loss in accordance with IEC 60947-7-x | 0.77 W |
| Pollution severity | 3 |
DRM, Relay socket, Number of contacts: 2, CO contact, Continuous current: 12 A, Screw connection
| Rated switching voltage | 250 V AC |
| Continuous current | 12 A |
| Max. switching voltage, AC | 300 V |
| Contact type | 2 CO contact |
DRM, Relay, Number of contacts: 2, CO contact, AgNi flash gold-plated, Rated control voltage: 12 V DC, Continuous current: 10 A, Plug-in connection
Finish : HDGAF Stainless Steel
Type : Gusset
Pattern : Slots Along the Length (Standard)
Thickness : 1.20 MM
Elements : Horizontal Unequal Tee
Base Metal : Mild Steel
Finish : HDGAF Stainless Steel
Design : Solid Cover
Type : Tray and Fittings Cover
Wrap Over Type Coupler for Cable Tray 50MM Side Height HDGAF
Base Metal : Mild Steel
Finish : HDGAF Stainless Steel
Type : Tray and Fittings Cover
Base Metal : Mild Steel
Finish : HDGAF Stainless Steel
Type : Tray and Fittings Cover
Thickness : 1.50 MM
Width : 100 MM
Base Metal : Mild Steel
Finish : HDGAF Stainless Steel
Type : 50 MM Side Height
Pattern : Slots Along the Length (Standard)
Thickness : 1.50 MM
Elements : 45° Horizontal Bend
Base Metal : Mild Steel
Finish : HDGAF Stainless Steel
Design : Solid Cover
Type : Tray and Fittings Cover
Thickness : 1.50 MM
Elements : Straight Section
Finish : HDGAF Stainless Steel
Type : 50MM Side Height
Pattern : Slots Along the Length (Standard)
Thickness : 1.50MM
Elements : Straight Section
Width : 100 MM
Side Height : 50 MM
Length : 3000 MM (3 Meter)
Manual hydraulic carrier is the most simple, effective, & common loading 7 unloading handling tool
One – piece cast pump with reliable oil – proof hydraulic system
Reinforced for added strength of load capacity
Effortless pallet entry / exit roller to make it easier to push & pull pallet truck
FEATURES:
Effective and safe control of loads whilst transportation
Extremely quick and efficient tie down and release of load thus saving time
High wear-resistance,
USES:
Mainly use for truck lashing
Container lashing and other logistics solutions
For tying down loads whilst transporting, shifting or moving them
For a variety of other applications.
Specification:
Size & Capacity – 2” X 3 Ton X 10 Meter
Packaging – 10 Sets Per Carton
Weight – 18 Kg
CBM Per Carton – 0.03
Webbing – 100% Polyester
Color – Orange
Size & Capacity – 2” X 3 Ton X 10 Meter
Packaging – 10 Sets Per Carton
Weight – 18 Kg
CBM Per Carton – 0.03
Webbing – 100% Polyester
Color – Orange
Plastic Hand Trolley with 5 wheels
Capacity : 500 kg
Size : 107 cm x 64 cm
Country of Origin : China
Rated voltage: 250.V. Rated Current: 32 A.
Wire connection cross section, finely stranded, max. 4 mm², Wire connection cross section, finely stranded, min. 0.25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 4 mm², Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.25 mm²
Rated voltage 300 V
Storage temperature -40 °C…85 °C, Operating temperature -40 °C…55 °C
Rated control voltage 230 V AC, Rated current AC 4,9 mA
Coil resistance 23500 Ω ± 10 %, Status indicator red LED
Rated voltage 300 V
Storage temperature -40 °C…85 °C, Operating temperature -40 °C…55 °C
Rated control voltage 24 V AC, Rated current AC 50 mA
Coil resistance 240 Ω ± 10 %, Status indicator red LED
Storage temperature -40 °C…85 °C, Operating temperature -40 °C…55 °C
Rated control voltage 24 V DC, Rated current DC 21,8 mA
Rated switching voltage 250 V AC, Continuous current 6 A
AC switching capacity (resistive), max. 1500 VA, DC switching capacity (resistive), max. 144 W @ 24 V
Switch-on delay ≤ 6 ms, Switch-off delay ≤ 15 ms
| Material : PA66/6 |
| Rated voltage:800.V. Rated current: 24A. |
| Wire connection cross-section, solid core, max. 2.5 mm², Wire connection cross-section, solid core, min. 0.5 mm², Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 2.5 mm², Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm² |
Material : PA66/6
| Material : PA66/6 |
| Rated voltage: 500.V. Rated Current: 32 A. |
| Wire connection cross-section, solid core, max. 4 mm², Wire connection cross-section, solid core, min. 0.5 mm² , Wire connection cross section, finely stranded, max. 4 mm², Wire connection cross section, finely stranded, min. 0.5 mm² |
| Material | PA 66/6 |
| Material : PA66/6 |
| Rated voltage: 800.V. |
| Wire connection cross-section, solid core, max. 16 mm², Wire connection cross-section, solid core, min. 2.5 mm² , Wire connection cross section, finely stranded, max. 35 mm², Wire connection cross section, finely stranded, min. 4 mm² |
| Material : PA66/6 |
| Rated voltage: 1000.V. Rated current: 192A. |
| Wire connection cross-section, solid core min. 16 mm², Wire connection cross-section, solid core, max. 16 mm², Wire connection cross section, finely stranded, min. 16 mm², Wire connection cross section, finely stranded, max. 70 mm² |
| Material : PA66/6 |
| Rated voltage: 1000.V. Rated current: 150A. |
| Wire connection cross-section, solid core, min. 16 mm², Wire connection cross-section, solid core, max. 16 mm², Wire connection cross section, finely stranded, min. 16 mm², Wire connection cross section, finely stranded, max. 50 mm² |
| Material : PA66/6 |
| Rated voltage: 800V. Rated current: 125A. |
| Wire connection cross-section, solid core, max. 16 mm², Wire connection cross-section, solid core, min. 4 mm², Wire connection cross section AWG, max. AWG 2, Wire connection cross section AWG, min. AWG 12 |
| Material : PA66/6 |
| Rated voltage: 800V. Rated current: 24A. |
| Wire connection cross-section, solid core, max. 6 mm², Wire connection cross section AWG, max. AWG 8, Wire connection cross section AWG, min. AWG 22 |