WALL MOUNT ENCLOSURE MILD STEEL IP 66

AED 130.00AED 925.00 AED (-23%)

Mild steel single door wall mounted enclosure, available in a wide range of sizes with a high IP 66 protection degree. Customers can receive enclosures with a short delivery time, that match the size requirements.

Clear

Wishlist
Compare Report Abuse
Material: Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Gland plate: 1.4 mm mild steel. Door: 1.2 mm mild steel / 1.5 mm for enclosures with a height or width of 500 mm or greater / 2 mm for enclosures with a height or width of 800 mm or greater. Mounting plate: 2 mm galvanized steel.
Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. Inner M6 welded studs to mount door profiles MMDP, see delivery. Sealing is ensured by an injected one piece polyurethane gasket.
Lock: nVent HOFFMAN customized double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking for 1000 mm high enclosures and above. Other inserts are available as an accessory.
Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.
Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
Protection: Complies with IP 66 | TYPE 4, 12 | IK 10. For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor applications.
Finish: RAL 7035 structured powder coating.

 

Mild steel single door wall mounted enclosure, available in a wide range of sizes with a high IP 66 protection degree. Customers can receive enclosures with a short delivery time, that match the size requirements.

1 WALL MOUNT ENCLOSURE MILD STEEL 300H X 250W X 155D IP 66 MAS0302515R5
2 WALL MOUNT ENCLOSURE MILD STEEL 300H X 250W X 210D IP66 MAS0302521R5
3 WALL MOUNT ENCLOSURE MILD STEEL 300H X 300W X 210D IP66 MAS0303021R5
4 WALL MOUNT ENCLOSURE MILD STEEL 400H X 300W X 210D IP66 MAS0403021R5
5 WALL MOUNT ENCLOSURE MILD STEEL 400H X 400W X 210D IP66 MAS0404021R5
6 WALL MOUNT ENCLOSURE MILD STEEL 500H X 400W X 210D IP66 MAS0504021R5
7 WALL MOUNT ENCLOSURE MILD STEEL 500H X 400W X 300D IP66 MAS0504030R5
8 WALL MOUNT ENCLOSURE MILD STEEL 500H X 500W X 210D IP66 MAS0505021R5
9 WALL MOUNT ENCLOSURE MILD STEEL 600H X 400W X 210D IP66 MAS0604021R5
10 WALL MOUNT ENCLOSURE MILD STEEL 600H X 400W X 260D IP66 MAS0604026R5
11 WALL MOUNT ENCLOSURE MILD STEEL 600H X 500W X 210D IP66 MAS0605021R5
12 WALL MOUNT ENCLOSURE MILD STEEL 600H X 500W X 300D IP66 MAS0605030R5
13 WALL MOUNT ENCLOSURE MILD STEEL 600H X 600W X 300D IP66 MAS0606030R5
14 WALL MOUNT ENCLOSURE MILD STEEL 700H X 500W X 210D IP66 MAS0705021R5
15 WALL MOUNT ENCLOSURE MILD STEEL 700H X 500W X 260D IP66 MAS0705026R5
16 WALL MOUNT ENCLOSURE MILD STEEL 800H X 600W X 300D IP66 MAS0806030R5
17 WALL MOUNT ENCLOSURE MILD STEEL 1000H X 800W X 300D IP66 MAS1008030R5
18 WALL MOUNT ENCLOSURE MILD STEEL 1200H X 800W X 300D IP66 MAS1208030R5

Additional information

Dimensions N/A
Size

300H X 250W X 155D, 300H X 250W X 155D, 300H X 250W X 210D, 300H X 300W X 210D, 400H X 300W X 210D, 400H X 400W X 210D, 500H X 400W X 210D, 500H X 400W X 300D, 500H X 500W X 210D, 600H X 400W X 210D, 600H X 400W X 260D, 600H X 500W X 210D, 600H X 500W X 300D, 600H X 600W X 300D, 700H X 500W X 210D, 700H X 500W X 260D, 800H X 600W X 300D, 1000H X 800W X 300D, 1200H X 800W X 300D

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Product Enquiry

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy

Translate »

Main Menu

WALL MOUNT ENCLOSURE MILD STEEL IP 66

AED 130.00AED 925.00 AED (-23%)

Add to cart